Contact

Ressources

Impact of reuse

Impact of Reuse

CIRCULAR SYSTEMS

Single-use recycling is not the solution

Recycling is widely perceived as the only solution for reprocessing our enormous amounts of waste. Unfortunately, in reality most waste is downcycled or incinerated. Reuse as a tool of the circular economy, on the other hand, keeps packaging in the loop and thereby avoids waste.

We are drowning in single-use waste!

188,7 kg

average packaging waste per person per year in the EU (according to Eurostat 2025).

1,6 %

of the 14.8 billion to-go packaging units in 2023 in Germany were reusable (according to WWF DE, 2024)

95 %

of plastics are single-use and are discarded after just one use (according to World Economic Forum, 2016)

only 16 %

of post-consumer plastic waste in Germany is recycled into new products (according to Heinrich Böll Stiftung, 2021).

Reuse is a system solution

Reuse is more than a packaging solution. In the best sense of the circular economy, reuse enables the transition from linear value chains to closed loops where resources are reused rather than lost. In doing so, reuse addresses multiple ecological challenges simultaneously. Resources are conserved, waste is avoided, and environmental impacts along the entire value chain are reduced: water, raw material consumption, and CO₂ emissions.

Wann macht Mehrweg ökologisch Sinn?

Reuse works through participation. Higher cycle numbers amplify the positive ecological benefits.

Hohe Rücklaufquote:

Only returned packaging can be used multiple times

Hohe Anzahl an Nutzungen:

With each reuse, the ecological footprint per packaging unit decreases

Hohe Akzeptanz:

A simple system increases participation and returns

Sinnvolle Einsatzbereiche:

Reuse has the fastest impact when material-intensive packaging is replaced (plastic, aluminum, or glass)

Materialarmes Produktdesign:

A resource-efficient design reduces material use and packaging weight

Effiziente Logistik:

Short transport routes, bundled reverse logistics, and lightweight packaging additionally reduce emissions

Less resource consumption through reuse

Reusable packaging causes up to 89% less waste compared to single-use across the entire lifecycle (at 30 uses)*. In some cases, less material and resources are used after just two uses.*representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar

Weniger Wassereinsatz durch Mehrweg

After just three uses, reuse on average requires less water across the entire lifecycle than single-use packaging.* The production of raw materials is typically far more water-intensive than washing.*repräsentativ nach EINFACH MEHRWEGs verifizierter Ökobilanz (ISO 14040/14044 konform): Vergleich 30x Nutzung TO-GO mit 30x Einweg an der Salatbar.

Weniger CO₂e Emission von

EINFACH MEHRWEG PREFILL

PREFILL zirkuliert in EINFACH MEHRWEG, dem größten Mehrwegsystem für kunststoffbasierte Takeaway- und Lebensmittelverpackungen. Es nutzt bestehende Handelslogistik und Pfandautomaten, um Rückführung und Reinigung für Nutzer: innen, Marken und Handel zirkulär und alltagstauglich zu gestalten.

Less CO₂e emissions from

EINFACH MEHRWEG TO-GO

After three uses, EINFACH MEHRWEG on average causes less CO₂e emissions than single-use plastic packaging, and after 14 uses less than paper packaging.**representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar.

How much CO2e does your product save with reuse?

Reuse works! Our reuse systems reduce waste and water consumption after just a few uses and reach their full CO2e savings potential at scale.

Vorverpackte Lebensmittel:

We'd be happy to calculate the CO₂e savings potential for you using our Product Carbon Footprint tool.

Impact at Sykell!

Learn how we at Sykell shape and continuously strengthen sustainability in our company.

Sustainability at Sykell (coming soon)

Contact

Ressources

Impact of reuse

Impact of Reuse

CIRCULAR SYSTEMS

Single-use recycling is not the solution

Recycling is widely perceived as the only solution for reprocessing our enormous amounts of waste. Unfortunately, in reality most waste is downcycled or incinerated. Reuse as a tool of the circular economy, on the other hand, keeps packaging in the loop and thereby avoids waste.

We are drowning in single-use waste!

188,7 kg

average packaging waste per person per year in the EU (according to Eurostat 2025).

1,6 %

of the 14.8 billion to-go packaging units in 2023 in Germany were reusable (according to WWF DE, 2024)

95 %

of plastics are single-use and are discarded after just one use (according to World Economic Forum, 2016)

only 16 %

of post-consumer plastic waste in Germany is recycled into new products (according to Heinrich Böll Stiftung, 2021).

Reuse is a system solution

Reuse is more than a packaging solution. In the best sense of the circular economy, reuse enables the transition from linear value chains to closed loops where resources are reused rather than lost. In doing so, reuse addresses multiple ecological challenges simultaneously. Resources are conserved, waste is avoided, and environmental impacts along the entire value chain are reduced: water, raw material consumption, and CO₂ emissions.

Wann macht Mehrweg ökologisch Sinn?

Reuse works through participation. Higher cycle numbers amplify the positive ecological benefits.

Hohe Rücklaufquote:

Only returned packaging can be used multiple times

Hohe Anzahl an Nutzungen:

With each reuse, the ecological footprint per packaging unit decreases

Hohe Akzeptanz:

A simple system increases participation and returns

Sinnvolle Einsatzbereiche:

Reuse has the fastest impact when material-intensive packaging is replaced (plastic, aluminum, or glass)

Materialarmes Produktdesign:

A resource-efficient design reduces material use and packaging weight

Effiziente Logistik:

Short transport routes, bundled reverse logistics, and lightweight packaging additionally reduce emissions

Less resource consumption through reuse

Reusable packaging causes up to 89% less waste compared to single-use across the entire lifecycle (at 30 uses)*. In some cases, less material and resources are used after just two uses.*representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar

Weniger Wassereinsatz durch Mehrweg

After just three uses, reuse on average requires less water across the entire lifecycle than single-use packaging.* The production of raw materials is typically far more water-intensive than washing.*repräsentativ nach EINFACH MEHRWEGs verifizierter Ökobilanz (ISO 14040/14044 konform): Vergleich 30x Nutzung TO-GO mit 30x Einweg an der Salatbar.

Weniger CO₂e Emission von

EINFACH MEHRWEG PREFILL

PREFILL zirkuliert in EINFACH MEHRWEG, dem größten Mehrwegsystem für kunststoffbasierte Takeaway- und Lebensmittelverpackungen. Es nutzt bestehende Handelslogistik und Pfandautomaten, um Rückführung und Reinigung für Nutzer: innen, Marken und Handel zirkulär und alltagstauglich zu gestalten.

Less CO₂e emissions from

EINFACH MEHRWEG TO-GO

After three uses, EINFACH MEHRWEG on average causes less CO₂e emissions than single-use plastic packaging, and after 14 uses less than paper packaging.**representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar.

How much CO2e does your product save with reuse?

Reuse works! Our reuse systems reduce waste and water consumption after just a few uses and reach their full CO2e savings potential at scale.

Vorverpackte Lebensmittel:

We'd be happy to calculate the CO₂e savings potential for you using our Product Carbon Footprint tool.

Impact bei Sykell!

Learn how we at Sykell shape and continuously strengthen sustainability in our company.

Sustainability at Sykell (coming soon)

Ressources

Impact of reuse

Impact of Reuse

CIRCULAR SYSTEMS

Single-use recycling is not the solution

Recycling is widely perceived as the only solution for reprocessing our enormous amounts of waste. Unfortunately, in reality most waste is downcycled or incinerated. Reuse as a tool of the circular economy, on the other hand, keeps packaging in the loop and thereby avoids waste.

We are drowning in single-use waste!

188,7 kg

average packaging waste per person per year in the EU (according to Eurostat 2025).

1,6 %

of the 14.8 billion to-go packaging units in 2023 in Germany were reusable (according to WWF DE, 2024)

95 %

of plastics are single-use and are discarded after just one use (according to World Economic Forum, 2016)

only 16 %

des Post-Consumer-Kunststoffabfalls wird in Deutschland zu neuen Produkten recycelt (lt. Heinrich Böll Stiftung, 2021).

 

 

Reuse is a system solution

Reuse is more than a packaging solution. In the best sense of the circular economy, reuse enables the transition from linear value chains to closed loops where resources are reused rather than lost. In doing so, reuse addresses multiple ecological challenges simultaneously. Resources are conserved, waste is avoided, and environmental impacts along the entire value chain are reduced: water, raw material consumption, and CO₂ emissions.

Wann macht Mehrweg ökologisch Sinn?

Reuse works through participation. Higher cycle numbers amplify the positive ecological benefits.

Hohe Rücklaufquote:

Only returned packaging can be used multiple times

Hohe Anzahl an Nutzungen:

With each reuse, the ecological footprint per packaging unit decreases

Hohe Akzeptanz:

A simple system increases participation and returns

Sinnvolle Einsatzbereiche:

Reuse has the fastest impact when material-intensive packaging is replaced (plastic, aluminum, or glass)

Materialarmes Produktdesign:

A resource-efficient design reduces material use and packaging weight

Effiziente Logistik:

Short transport routes, bundled reverse logistics, and lightweight packaging additionally reduce emissions

Less resource consumption through reuse

Reusable packaging causes up to 89% less waste compared to single-use across the entire lifecycle (at 30 uses)*. In some cases, less material and resources are used after just two uses.*representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar

Weniger Wassereinsatz durch Mehrweg

After just three uses, reuse on average requires less water across the entire lifecycle than single-use packaging.* The production of raw materials is typically far more water-intensive than washing.*repräsentativ nach EINFACH MEHRWEGs verifizierter Ökobilanz (ISO 14040/14044 konform): Vergleich 30x Nutzung TO-GO mit 30x Einweg an der Salatbar.

Weniger CO₂e Emission von

EINFACH MEHRWEG PREFILL

PREFILL zirkuliert in EINFACH MEHRWEG, dem größten Mehrwegsystem für kunststoffbasierte Takeaway- und Lebensmittelverpackungen. Es nutzt bestehende Handelslogistik und Pfandautomaten, um Rückführung und Reinigung für Nutzer: innen, Marken und Handel zirkulär und alltagstauglich zu gestalten.

Less CO₂e emissions from

EINFACH MEHRWEG TO-GO

After three uses, EINFACH MEHRWEG on average causes less CO₂e emissions than single-use plastic packaging, and after 14 uses less than paper packaging.**representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar.

How much CO2e does your product save with reuse?

Reuse works! Our reuse systems reduce waste and water consumption after just a few uses and reach their full CO2e savings potential at scale.

Vorverpackte Lebensmittel:

We'd be happy to calculate the CO₂e savings potential for you using our Product Carbon Footprint tool.

Impact at Sykell!

Learn how we at Sykell shape and continuously strengthen sustainability in our company.

Sustainability at Sykell (coming soon)

Ressources

Impact of reuse

Impact of Reuse

CIRCULAR SYSTEMS

Single-use recycling is not the solution

Recycling is widely perceived as the only solution for reprocessing our enormous amounts of waste. Unfortunately, in reality most waste is downcycled or incinerated. Reuse as a tool of the circular economy, on the other hand, keeps packaging in the loop and thereby avoids waste.

We are drowning in single-use waste!

188,7 kg

average packaging waste per person per year in the EU (according to Eurostat 2025).

1,6 %

of the 14.8 billion to-go packaging units in 2023 in Germany were reusable (according to WWF DE, 2024)

95 %

of plastics are single-use and are discarded after just one use (according to World Economic Forum, 2016)

only 16 %

of post-consumer plastic waste in Germany is recycled into new products (according to Heinrich Böll Stiftung, 2021).

Reuse is a system solution

Reuse is more than a packaging solution. In the best sense of the circular economy, reuse enables the transition from linear value chains to closed loops where resources are reused rather than lost. In doing so, reuse addresses multiple ecological challenges simultaneously. Resources are conserved, waste is avoided, and environmental impacts along the entire value chain are reduced: water, raw material consumption, and CO₂ emissions.

Wann macht Mehrweg ökologisch Sinn?

Reuse works through participation. Higher cycle numbers amplify the positive ecological benefits.

Hohe Rücklaufquote:

Only returned packaging can be used multiple times

Hohe Anzahl an Nutzungen:

With each reuse, the ecological footprint per packaging unit decreases

Hohe Akzeptanz:

A simple system increases participation and returns

Sinnvolle Einsatzbereiche:

Reuse has the fastest impact when material-intensive packaging is replaced (plastic, aluminum, or glass)

Materialarmes Produktdesign:

A resource-efficient design reduces material use and packaging weight

Effiziente Logistik:

Short transport routes, bundled reverse logistics, and lightweight packaging additionally reduce emissions

Less resource consumption through reuse

Reusable packaging causes up to 89% less waste compared to single-use across the entire lifecycle (at 30 uses)*. In some cases, less material and resources are used after just two uses.*representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar

Weniger Wassereinsatz durch Mehrweg

After just three uses, reuse on average requires less water across the entire lifecycle than single-use packaging.* The production of raw materials is typically far more water-intensive than washing.*repräsentativ nach EINFACH MEHRWEGs verifizierter Ökobilanz (ISO 14040/14044 konform): Vergleich 30x Nutzung TO-GO mit 30x Einweg an der Salatbar.

Weniger CO₂e Emission von

EINFACH MEHRWEG PREFILL

Compared to semi-rigid and rigid single-use packaging, EINFACH MEHRWEG PREFILL reduces CO₂e after just two to seven uses.* Fundamentally, the type of single-use packaging being replaced by reuse is decisive for the climate impact.*basierend auf internen Berechnungen mit dem eigenen ISO 14040/14044 konformen Porduct-Carbon-Footprint Tool

Less CO₂e emissions from

EINFACH MEHRWEG TO-GO

After three uses, EINFACH MEHRWEG on average causes less CO₂e emissions than single-use plastic packaging, and after 14 uses less than paper packaging.**representative according to EINFACH MEHRWEG's verified life cycle assessment (ISO 14040/14044 compliant): comparison of 30x TO-GO use with 30x single-use at the salad bar.

How much CO2e does your product save with reuse?

Reuse works! Our reuse systems reduce waste and water consumption after just a few uses and reach their full CO2e savings potential at scale.

Vorverpackte Lebensmittel:

We'd be happy to calculate the CO₂e savings potential for you using our Product Carbon Footprint tool.

Impact at Sykell!

Learn how we at Sykell shape and continuously strengthen sustainability in our company.

Sustainability at Sykell (coming soon)